Model: SWD-T
This flow control system combines a weir diaphragm valve with an electro-pneumatic regulator to automate flow adjustment. Up to six sets of pressure and time parameters can be stored and recalled using external signals.
| Valve connection | ISO ferrule |
| Valve actuation method (NC) | NC (normally closed) type |
| Valve actuation method (NO) | NO (normally open) type |
| Valve working fluid | Water, pure water, chemical liquids (fluids that do not corrode wetted materials) |
| Valve working pressure (MPa) | 0~0.6 |
| Valve proof pressure (hydraulic, MPa) | 2.0 |
| Valve fluid temperature (℃) | 5~90 (steam sterilization possible at 130°C for up to 20 min) |
| Valve ambient temperature (℃) | 0 to 60 |
| Valve operating frequency (cycles/min) | 20 or less |
| Valve seat leakage (cm3/min) | 0 (hydraulic) |
| Valve operating port | Rc1/8 |
| Valve operating fluid | Air |
| Actuator material | ADC12 |
| Diaphragm Material | PTFE/EPDM |
| Body material | SS316L |
| Electropneumatic regulator input specification (option 1) | 0-10V DC |
| Electropneumatic regulator input specification (option 2) | 0-5V DC |
| Electropneumatic regulator input specification (option 3) | 4-20mA DC |