Model: HB-FP2
This normally closed, direct acting 2-port solenoid valve handles water, pure water and chemical liquids that do not corrode its wetted materials. It has a stainless steel body and a fluoro rubber seal.
| Working fluid | Water/pure water/chemical liquids (fluids that do not corrode wetted part materials) |
| Working pressure MPa | 0 to 0.4 |
| Proof pressure (water pressure) MPa | 2 |
| Fluid temperature °C | -10 to 60 (no freezing) |
| Valve seat leakage cm3 /min | 0 (water pressure) |
| Mounting orientation | Unrestricted |
| Degree of protection | IP 65 or equiv. |
| Rated voltage | 100 VAC(50/60Hz), 200 VAC(50/60Hz), 24 VDC |
| Ambient temperature (°C) | -20 to 60 |
| Power consumption (w) | 11 |
| Connection Bore size (HB31-6-3) | Rc1/8 |
| Connection Bore size (HB31-8-3, HB41-8-5) | Rc1/4 |
| Connection Bore size (HB41-10-5) | Rc3/8 |
| Orifice size (HB31, mm) | 3.0 |
| Orifice size (HB41, mm) | 4.0 |
| Cv (HB31) | 0.31 |
| Cv (HB41) | 0.48 |
| Weight (HB31, kg) | 0.52 |
| Weight (HB41, kg) | 0.69 |
| Body / Seal | Stainless steel / Fluoro rubber |