MR10R is an ultra-compact 10 mm wide metal-free diaphragm direct acting solenoid valve with a PEEK body. It comes as 2-port NC, 2-port NO and 3-port universal. It is used for water, pure water and chemical liquids, with M5, M6 and 1/4-28UNF ports and 24 VDC or 12 VDC rated voltage.
| Working Fluid | Water / pure water / chemical liquids (fluids that do not corrode the wetted part materials) |
| Valve Structure | Diaphragm direct acting (rocker), 2-port NC (MR10R-2NC) / 2-port NO (MR10R-2NO) / 3-port universal (MR10R-3) |
| Proof Pressure | 0.4 MPa (water pressure) |
| Working Pressure | -0.08 to 0.2 MPa |
| Fluid Temperature | 5 to 50 °C |
| Ambient Temperature | 5 to 50 °C |
| Atmosphere | No explosive or corrosive atmospheres |
| Valve Seat Leakage | 0 cm³/min (water pressure) |
| Port Size | M5, M6, 1/4-28UNF (direct piping); actuator only without piping (order codes blank / M5 / M6 / 4U) |
| Orifice Size | 1 mm |
| Cv | 0.03 |
| Volumetric Capacity | 19 µL (volume of wetted parts formed by the body and diaphragm, piping volume excluded) |
| Body / Seal Material | Body PEEK / sealant FKM (order code EF); diaphragm FKM; packing FKM; connection adaptor PEEK |
| Mounting Orientation | Unrestricted (install vertically so that the coil, where little fluid accumulates, is at the top) |
| Weight | 18 g (actuator), 22 g (direct piping) |
| Rated Voltage | 24 VDC / 12 VDC (voltage fluctuation range ±5%) |
| Power Consumption | When starting 3.6 W (24 VDC) / 4.2 W (12 VDC); when holding 1 W (starting: from energizing to 50 ms) |
| Leakage Current | 1.0 mA or less (24 VDC), 2.0 mA or less (12 VDC) |
| Thermal Class | Class 130 (B) |
| CE Marking / Polarity | CE marking compatible; the solenoid valve has polarity (connect the red lead wire to the + side) |