Model: UP / PTN2 / PTNL2 / EH / CG
UP and EH are fiber tubes with an outer diameter of 1.8 mm, used with dedicated PTN or CG fittings. EH-5802 is used with CG push-in fittings and cannot be used with PTN barbed fittings.
| UP-9102: Working fluid | Compressed air |
| UP-9102: Working pressure (20°C) | -100 kPa to 0.7 MPa |
| UP-9102: Ambient temperature (°C) | -10 to 60 (no freezing) |
| UP-9102: O.D. × I.D. (mm) | 1.8 × 1.0 |
| UP-9102: Inner diametral accuracy | ±0.1 |
| UP-9102: Material | Conductive Polyurethane |
| UP-9102: Min. installation radius (mm) | 4 |
| PTN*: Working pressure | -100 kPa to 0.7 MPa |
| PTN*: Applicable tube | UP-9102-20-*-F1 |
| PTN*: Effective cross-sectional area (mm2) | Straight, barbed nipple: 0.3 elbow: 0.2 |
| PTN*: Flow rate (ℓ/min (ANR), 0.5 MPa) | Straight, barbed nipple: 20 elbow: 13 |
| EH-5802: Working pressure (20°C) | -100 kPa to 1.0 MPa |
| EH-5802: O.D. × I.D. (mm) | ø1.8 × ø1.2 |
| EH-5802: Material | Special polyolefin |
| EH-5802: Applicable fittings | CG Series (push-in) |
| EH-5802: Min. bending radius (JIS B 8381) (mm) | 5 |
| CG: Working fluid | Clean air |
| CG: Working pressure | -100 kPa to 1.0 MPa |
| CG: Lubricant | Oil-prohibited |
| CG: Applicable tube | Fiber tube (UP-9402-F1, EH-5802) |