Model: EBR-M / EBR-G
This rod-type electric actuator has a built-in guide. Its structure supports offset workpieces and is suitable for press-fitting and lifting.
| Specification model (inline motor mount) | EBR-04 E |
| Motor (EBR-04 inline motor mount) | 35 Stepping Motor |
| Drive Method (EBR-04 inline motor mount) | Ball screw ø10 |
| Stroke (mm; EBR-04 inline motor mount) | 50 to 400 |
| Repeatability (mm) | ±0.01 |
| Lost Motion (mm) | 0.1 or less |
| Motor Power Supply Voltage (ECMG/ECG) | 24 VDC ±10% |
| Motor Power Supply Voltage (ECR) | 24 VDC ±10% or 48 VDC ±10% |
| Insulation Resistance | 10 MΩ, 500 VDC |
| Dielectric Strength | 500 VAC for 1 minute |
| Operating Ambient Temperature (ECMG/ECG) | 10°C to 40°C (no freezing) |
| Operating Ambient Temperature (ECR) | 0 to 40°C (no freezing) |
| Operating Ambient Humidity | 35 to 80% RH (no condensation) |
| Storage Ambient Temperature | -10°C to 50°C (no freezing) |
| Atmosphere | No corrosive gas, explosive gas, or dust |
| Protection Structure (EBR-04 inline motor mount) | IP40 |