Model: GPS3 / MGPS3 / UGPS3
This digital gap switch detects the gap between a workpiece and a detection nozzle. Two thresholds can be set within the detection range to distinguish rough contact from precise contact.
| Working fluid / GPS3/GPS3-E | Compressed clean air (after 5 μm filter, lubrication not possible) |
| Working pressure (kPa) / GPS3/GPS3-E | 1 to 200 |
| Proof pressure (kPa) / GPS3/GPS3-E | 600 |
| Detection range (mm) / GPS3-E | 0.02 to 0.15 |
| Detection range (mm) / GPS3 | 0.03 to 0.4 |
| Repeatability (mm) / GPS3-E | ±0.01 |
| Detection nozzle / GPS3/GPS3-E | Single hole nozzle ø1.5 |
| Output rating / GPS3/GPS3-E | 30 VDC, 100 mA or less |
| Internal voltage drop (V) / GPS3/GPS3-E | 2 or less (using 100 mA) |
| Ambient temperature (°C) / GPS3/GPS3-E | 0 to 50 (no freezing or condensation) |
| Degree of Protection / GPS3/GPS3-E | IP 67 or equiv. |
| Wiring / GPS3/GPS3-E | M12 connector, 4-pin |
| Weight (g) / GPS3/GPS3-E | 128 (excluding cable) |