Model: VSNP/VSNPM
The VSNP is a 10.3 mm wide integrated vacuum switching unit, and the VSNPM is its manifold version. The working pressure is 0 to 0.55 MPa and the degree of protection is IP40 or equivalent.
| Working Fluid | Air |
| Working Pressure | 0 to 0.55 MPa |
| Ambient/Fluid Temperature | 5 to 50 °C |
| Ambient Humidity | 35 to 85% RH (no condensation) |
| Protection Rating | IEC standards IP40 or equivalent |
| Vibration | 50 m/s² or less |
| Shock | 150 m/s² or less |
| Valve Construction | Direct acting poppet valve |
| Rated Voltage | 24 VDC |
| Voltage Fluctuation Range | ±10% |
| Power Consumption | 2.2 W when starting, 0.6 W when holding (energy-saving circuit built in) |
| Operation Indicator | Green LED |
| VALVE ACTION | Normally closed |
| Response Time | 5 ms or less for both vacuum generation (OFF→ON) and vacuum stop (ON→OFF), measured until pressure change is detected at the vacuum port with rated pressure and voltage supplied |
| Wiring Method | Connector, 500 mm lead wire (red: +24 VDC, black: 0 V) |
| Vacuum Break Flow Rate | 0 to 20 L/min (ANR, at a supply pressure of 0.5 MPa) |
| Vacuum Pressure | -100 to 0 kPa |
| Suction Flow Rate | 8 L/min (ANR, with supply at -80 kPa) |